Payment & Shipping Terms:
|Product Name:||Ring Network Fiber Converter||10/100/1000M Port:||One Port|
|10/100M:||Three Ports||Optical Interface:||Duplex SC|
|LAN Port:||Four RJ45||Console Port:||One COM|
|Fiber Type:||SM Dual Fiber||Link Length:||40Km|
FAFS-GDSES2R4-40C,10/100/1000M Dual Fiber Ethernet Switch For Ring Network With Four RJ45 Ports
Self recovery optical fiber Ethernet switch (fiber media converter) is a switch that can support the group ring network protocol. It is with ring network redundant backup line. If a link network is formed, the network will automatically recover if a link fails to enable the standby line.
The so-called self healing ring (SHR), generally refers to the use of ADM to form a circular network to achieve self-healing. According to the classification of optical fiber number of self-healing ring, there are two fiber ring and four fiber ring; Fiberall’s ring type optical fiber media converter is with at least 2 optical ports, single or double fiber, there are two kinds of self-healing methods:
Two fibers unidirectional self healing ring: The two fibers unidirectional channel protection ring is realized by two optical fibers, one is used to transmit the service signal, and the other is used for protection. The basic principle of the system is 1+1 protection (first end bridging and terminal switching), that is, using 1 fiber and 2 optical fiber to carry business signals at the same time and transmit them in two directions respectively, but the receiver only chooses one of them. From the perspective of realization function, this protection belongs to the subnet connection protection type. From the capacity perspective, the traffic capacity of the ring is equal to the sum of all traffic entering the ring.
Two fibers two channels bi-directional protection ring: also use 2 fibers, and can be divided into 1+1 and 1:1 in two ways, 1+1 method and unidirectional path protection ring is basically the same (transmit at the same time but receive priority), just return the signal in the opposite direction ( bi-directional). Its main advantage is to use equipment without protection ring or reuse channel function of same ADM equipment used in linear situation, thus increasing the total business volume of transplanting. Two fibers bi-directional protection can also adopt the 1:1 mode, that is, the extra traffic can be transferred in the protection channel, only when the fault occurs, it will turn from the working channel to the protection channel.
Main Characteristics Of Self Recovery Fiber Switch
With 2x1000BASE-SX/LX optical fiber ring network interface (Fiber) and 3x10/100BASE-T and 1 x10/100/1000M adaptive Ethernet twisted pair interface (Ethernet);
Built in Web management;
Support RSR (Rapid Super Ring) redundant ring network technology;
Provide remote loss diagnosis, electrical port link and fiber port link diagnosis, dynamic data transmission, full duplex / half duplex and rate indicator;
Electrical and optical fiber support hot plug, and automatic cross recognition, can be connected to computer network card, hub or switch;
The average working time of no fault is over 100 thousand hours, which is in line with the telecom level operation standard;
With wide range of dynamic power supply range AC100V~AC275V, can effectively prevent the surge or pulse peak in the power grid.
|Part Number||Product Description|
|FAFS-GDSES2R4-40C||10/100/1000M Ring Network Fiber Ethernet Switch 2 Dual Fiber SC Ports 4 RJ45 Ports|
|FAFS-GSSES2R4-20C||10/100/1000M Ring Network Fiber Ethernet Switch 2 Single Fiber SC Ports 4 RJ45 Ports|
|FAFS-GDSEP2R4-20C||10/100/1000M Ring Network Fiber Ethernet Switch 2 SFP Slots 4 LAN Ports|
All types are available with SC, ST, FC and SFP Fiber Port, please feel free to contact Fiberall if you have related enquiry.