Payment & Shipping Terms:
|Product Name:||Fiber Optic Distribution Box||Application:||Indoor Use|
|Installation Method:||Wall Mounted||Maximum Capacity:||24 Cores|
|Recommend Fiber Tray:||12 Fibers Grey||Recommend Pigtail:||12 Cores 0.9mm 1.5m|
|Working Temperature:||-40 ~ +80℃||Color:||Grey|
Indoor Use Fiber Optic Distribution Box Wall Mounted Metal Patch Panel 24 Fibers
Fiberall wall mounted fiber distribution boxes are design for indoor & outdoor use, they are composed of two parts, the big part is for fiber fusion connection between input cable and pigtail, and the small part is for connection between patch cords. The box can be made with stainless steel or cold rolled metal sheet. They can be locked to avoid man-made or environmental broken.
Material Requirement Of Fiber Optic Patch Panel
A high quality fiber optic patch panel should have excellent performance on anti-corrosion, antirust and flame retardant. So the materials used in patch panel must meet the below requirement:
All parts should have anti-corrosion properties, if the material uses is without anti-corrosion properties, it should be treated with preservatives; the physical and chemical properties must be stable and compatible with optical cable sheath and pigtail sheath.
The metal structure after electroplating processing no visible rust appearance in 48h salt spray test.
The metal structure with coating, the coating and the substrate should have good adhesion, adhesion should at least meet 2 level requirements of GB/T9286 standard. Peeling coating at the intersections of the cuts or incision edge, cross cutting area should not greater than 15%.
The combustion performance of the nonmetal structural elements and fiber optic connectors in the equipment shall meet the following requirements:
No burning on test ed sample;
2) The duration of flaming combustion of the test sample is not more than 10s after leaving the fire, and the flame or burning particles falling from the test sample does not spread the combustion to the bottom of the test sample.
Specification Of FA-FDWIM24G
1, Adapters output: 12cores, 24 cores, 48 cores, 72 cores, 96 cores for option
2, Suitable for different adapter (SC simplex, SC duplex, LC duplex, LC Quadplex, ST simplex, FC simplex)
3, Open way: dual door open
4, Accessories: Can be fully loaded with adapter, pigtail and accessories like fiber tray, fiber winding wheel, protection sleeve, nylon tie, and snake like tube.
5, Cable input is with rubber dust cover.
6, The cable entries are big enough for most of cable with different diameters.
7, It is suitable for both ribbon and buddle fiber cable
1, Different capacity for options
2, Reliable fiber lead and perfect fix up design
3, Reasonable pigtail fixes up and perfect protection
4, Flexible design and enough space make them convenient for operations and maintenance
5,Whole range protected design for fiber lay to ensure the bending radius≥40mm
6,The shell is high intensified & insulated material, thus having excellent mechanic performance
7,Well processed surface minimize scratches
8, The incision parts are well processed and avoid burr and sharp edge.
9, Strict packing to avoid transportation damage
|Product Name||Indoor Fiber Patch Box|
|Installation Type||Wall Mounted|
|Open way||Two doors open|
|Application||Indoor, corridor, wall mounted|
|Sheet Material||Cold Rolled Metal Sheet|
|Fiber Capacity||24 cores|
|Fiber Tray||12 fibers each tray|
|Adapter Panel||Inside, Plastic|
|Suitable Adapter Type||SC Simplex, LC Duplex, ST with square module, FC Square|
|Assembly||Empty, half loaded or full loaded|
|Accessories||Fiber Adapter, Pigtail, Fiber Splice Tray, door locker, Cable fastener, strengthen member fastener, Splice Protection Sleeve, Cable Tie etc.|