Payment & Shipping Terms:
|Product Name:||Fiber Splice Joint Closure||Shape:||Vertical|
|Installation Method:||Pole Or Wall Mounted||Sealing Way:||Screwing Type|
|Tray Number:||Max 4 Layers||Cable Inlet:||2 Ports|
|Cable Outlet:||Two Ports||Cable Type:||Outdoor Bundle Cable|
FA-FSC-V2, Dome Type Fiber Optic Splice Closure Mechanical Sealing 4 Ports Max 96 Cores
During winding fiber, note the distortion direction of the optical fiber, generally is should be fallen "8" type, do not wring the fiber and avoid damage during covering and package. The fiber optic splice closure must be operated strictly according to the instruction and procedures, otherwise it may cause heavy losses. And must pay attention to the operation procedure of the splicing machine, and the length of the heat shrinkable tube shall be consistent with the requirements. After the fiber is spliced, the fiber should be protected by the heat shrinkable tube and the remaining fiber should be winded. During the process of winding fiber, the bending radius of the fiber can not be too small, generally not less than 40mm. If the bending radius is too small, it is easy to cause big refraction loss and increases dispersion. For a long time, the fiber may be broken. Specific operation requirements:
Wind 1.5 cycles of the optical fiber in the fiber tray, and then wind all the remaining fibers in the fiber splice joint closure.
2, Use single core buffer tube for single core fiber, and use ribbon buffer tube for ribbon fiber . Use nylon tie to tight the buffer at the inlet of the fiber splice closure.
3, Match two fibers or two fiber band according to the provisions and put the connection into the slot of the fiber tray, and wind the extra fiber in the fiber cassette.
Cover the upper plate and press it in place.
5, Use correct fiber tray according to the needs of different capacity, decided added number pf fiber cassette, the superposition type of fiber tray must conform to the slots unit for fiber connection and meet requirements of checking and maintenance .
Main Components Of FA-FSC-V2
|No.||Name of components||Quantity||Usage||Remarks|
|1||FOSC cover||1 piece||Protecting fiber cable splices in whole||
Height x Diameter
355mm x 150mm
|2||Fiber optic splice tray (FOST)||
Max. 6 trays (bunchy)
Max. 4 trays (ribbon)
|Fixing heat shrinkable protective sleeve and holding fibers||Suitable for: Bunchy:12,24(cores) Ribbon:6 (pieces)|
|3||Fiber holding tray||1 pcs||Holding fibers with protective coat|
|4||Base||1set||Fixing internal and external structure|
|5||Plastic hoop||1 set||Fixing between FOSC cover and base|
|6||Seal fitting||1 pc||Sealing between FOSC cover and base|
|7||Seal rings for inlet/outlet ports||4pcs||For the inner seal of inlet/outlet ports; the diameter is 16mm,can shrink to 8.5mm—16mm|
|8||Pressure testing valve||1 set||After inject air, it is used for pressure testing and sealing testing||Configuration as per requirement|
|9||Earthing deriving device||1 set||Deriving metal parts of fiber cables in FOSC for earthing connection||Configuration as per requirement|
Main Accessories And Special Tools
|No.||Name of accessories||Quantity||Usage||Remarks|
|1||Heat shrinkable protective sleeve||Protecting fiber splices||Configuration as per capacity|
|2||Nylon tie||Fixing fiber with protective coat||Configuration as per capacity|
|3||Earthing wire||1 piece||Putting through between earthing devices||To put through as per actual requirement|
|4||Abrasive cloth||1 piece||Scratching fiber cables|
|5||Labeling paper||1 piece||Labeling fibers|
|6||Special wrench||2 pieces||Installing and tightening nut of reinforced core and nut (plastic) of inlet/outlet tube|
|7||Seal tape||1 ring||Enlarging diameter of fiber cable which fits in with gasket ring.||Configuration as per specification|
|8||Insulation tape||1 ring||Enlarging diameter of fiber cable for easy fixing|
|9||Metal hoop||1 set||For wall mounting and pole hugging|
|decided by customers||Hitched to fibers and fixed with FOST, managing buffer.||Configuration as per requirement|
|11||Desiccant||1 bag||Put into FOSC before sealing for desiccating air|